Home > ACCESSORIES > Silencer Accessories >

3 Lug Interface Assembly For .40 S&W, 10mm, and .45 ACP
3 Lug Interface Assembly For .40 S&W, 10mm, and .45 ACP


 
MSRP: $120.00

Product Code: GAR40QDK
Qty:

Description
 
DO NOT BUY A 40S&W/10mm kit for a 9mm or smaller bullet diameter application.

The 3 lug interface assembly is an integral 3 lug assembly which adds minimal length to the suppressor. This kit allows for QD mounting of many Griffin suppressors. To view applicable calibers and ratings see individual suppressor product pages. Our 3 lug adapter requires minimal deflection of the spring bushing for installation in some cases negating the need to modify hand stops and grips that come close to the 3 lug adapter. The 10mm/40S&W kit is made for Mp5 10mm or 40S&W barrels that comply with the HK dimensioned 3 lug. Additionally, this interface is designed to work with our .45ACP 3 Lug mounts available in 5/8x24, .578x28, and 16X1LH (KRISS compatible).

Note: The 10mm/40S&W kit is NOT compatible with Griffin 5.56 through 9mm 3 lug barrel adapters which are a smaller diameter. Additionally the 10mm/40S&W kit currently supports the 10mm or 40S&W H&K MP5 only and should only be used on the Revolution 45, or RESISTANCE 45 silencer as there is not enough bore clearance to shoot larger than 9mm bullets through 9mm silencers. The 9mm 3 lug assembly can be interfaced with the Optimus, Revolution 45, or Resistance 45 suppressors and fired on 9mm 3 lug host firearms.


Made of 17-4 Stainless steel and with a 17-7 wire spring, this coupler kit is heavy duty for full auto applications.

Applicable to the following Griffin suppressors:
REVOLUTION 45
RESISTANCE 45



Features
    • 17-4 and 17-7 construction
    • minimal length added to silencer
    • Compatible with standard 3 lug adapters except for .45
    • Lifetime Warranty

Accessories
9mm 3 Lug Barrel Adapters Revolution 9 Silencer ( MOD 3 )
MSRP: $70.00
MSRP: $795.00 CLICK HERE TO ORDER NOW!
Revolution 3 Lug Adapters Revolution 9mm Silencer

Average Rating: 1 of 5 Total Reviews: 1 Write a review »

  1 of 1 people found the following review helpful:
 
Serious design flaw July 29, 2017
Reviewer: Randy Skiba from St Charles, MO United States  
I purchased one of these and two of the 45 cal 3 lug adapters as soon as they came out. When used with either adapter, there is insufficient spring pressure on the mount that leads to excessive wobble in the suppressor to the point that I do not feel comfortable shooting it that way. Three emails in the last 3 1/2 weeks to tech support have gone unanswered. I would not buy until they address this issue.

Was this review helpful to you?