OPTIMUS® 6 Suppressor (All Mounts)

CLICK HERE to Learn About Griffin Factory-Direct Suppressors Shipped To Your Door!

The Optimus® 6 is a 6mm bore multi-jet fusion additive manufactured (3D Printed) suppressor optimized for reducing system backpressure over "traditional" suppressors by way of its high-flow baffle design, while maintaining impressive flash and sound reduction. The quad-tine flash hider endcap was painstakingly tuned in conjunction with the low backpressure baffle stack to kill flash at a level almost unseen in other low backpressure suppressors available on the market. The Optimus® 6 is available in three mounting variants: Taper Mount, DUAL-LOK®, and Utility Mount (HUB 1.375x24 TPI); and user's choice of black or FDE high-temp cerakote finish. This suppressor was optimized for 5.56mm platforms, with the capabilities for high performance on 6mm projectiles. 

The Optimus® 6 is made entirely from ultra-strong 17-4 stainless steel. The tube body of the printed core is machined during post-production to create a smooth, beautiful exterior absent of the normal printing layers visible in most other printed cans. The blast shield and mount system is machined in-house from 17-4 SS, then laser-welded to the baffle core allowing for easy warranty of the suppressor in the case of a baffle strike or other catastrophic failure. Optimus® 6 suppressors, like all other Griffin suppressors, are warrantied for life under Griffin's Perpetual™ Lifetime Warranty.

Griffin Armament has been designing and prototyping additive-manufactured suppressors for many years, but felt the technology had not become accessible or affordable enough to bring to market a feature-packed sound suppressor at a value-driven price. Recent advancements in 3D metal printing technology has changed this and in response Griffin went full-tilt into designing it's first line of suppressors manufactured using this technology.

NOTE: Utility Mount (HUB) Optimus® 6 Suppressors DO NOT COME WITH A MUZZLE DEVICE OR HUB INSERT. Muzzle Devices and mount interfaces for HUB-mount variants must be purchased separately.  

FEATURES: 

• 3 Mounting Options: DUAL-LOK®, Taper Mount, or Utility Mount (HUB 1.375x24 TPI)

• 1.73" Tube Diameter for Increased Internal Volume

• Multi-Jet Fusion | Additive Manufacturing (3D Printing)

• High Flow Baffle Stack and End Cap 

• Flash-Killer Quad-Tine End Cap for Maximum Flash Reduction

• Available in Black or FDE High Temp Cerakote Finish

• Full 17-4 Stainless Steel Construction
  
  
• EZ-Brake™ (.22cal - 1/2x28) Included with DUAL-LOK® and Taper Mount Models (HUB Mounts and Muzzle Device for Utility Mount (HUB) models MUST BE PURCHASED SEPARATELY)

• Perpetual™ Lifetime Warranty

Muzzle Device Compatibility:

• The Taper Mount model is compatible with ALL Griffin Taper Mount Muzzle Devices
• The DUAL-LOK® model is compatible with ALL DUAL-LOK® Muzzle Devices
• The Utility Mount model is dependent on the HUB you are using. See info below for compatibility:
• Plan-A™ Long HUB - Compatible with ALL Griffin Taper Mount Muzzle Devices
• Plan-A™ Short HUB - Compatible with ONLY Taper Mount EZ-Brake™, Minimalist Brake, Minimalist Flash Suppressor, Closed Tine Flash Hider, Hammer Comp, Bayonet Micro Brake, Paladin® 2-Port Brake, and Taper Mount to Direct Thread Adapters

Manual:

CLICK HERE FOR DIGITAL MANUAL

Caliber & Barrel Restrictions: 

5.56mm Cartridges: 10.5" minimum | 6mm Cartridges: 12.5" minimum
The Optimus® 6 Suppressor is rated up to 6mm ARC

Sound Test Data: 

-22.15 dB (137.0 dB on 11.5" 5.56mm Griffin MK2 - 55 gr M193)

SKU:

GAOP6

UPC:

Caliber:

6mm

Weight (HUB):

15.2 oz

Length (HUB):

6.02"

Weight (Taper Mount):

16.5 oz

Length (Taper Mount):

6.59"

Weight (DUAL-LOK®):

17.2 oz

Length (DUAL-LOK®):

6.68"

Material:

17-4 Stainless Steel

Diameter:

1.73"

Finish:

High Temp Cerakote

Full Auto Rated:

Yes

User Serviceable:

No

dB Rating:

Coming Soon...